top of page

Choosing the Right EV Charger Installation Service: What Every EV Owner Needs to Know

Writer's picture: EvGuruEvGuru

Choosing the right EV charger installation service for your EV charger is a decision that goes beyond just plugging in a unit. It’s about ensuring safety, longevity, and the best possible performance for your electric vehicle (EV). Let's explore the essential factors to consider when picking an installer for this crucial task. As you dive deeper, you’ll see why it’s not just about getting the job done—it’s about doing it right!


1. Safety: The Uncompromising Priority

When you think about an EV charger, picture a device that mediates a massive flow of electricity from your home into your car. This is no small feat—it’s akin to managing a mini power station in your garage. The wrong installation? Well, that could lead to dangerous exposure to electricity, putting not just you but your family and neighbors at risk of fires or electric shocks. I don’t know about you, but a little bit of caution goes a long way here.


In Malaysia, regulations are clear. Compliance with local safety codes isn’t just about checking off boxes; it's about real-world safety. Make sure your installer is well-versed in Malaysian guidelines to avoid any mishaps.


2. Installation Materials: What You Don’t See Matters

Ever thought about the quality of the materials going into your charger installation? Trust me, it matters more than you’d think. Take it from EvGuru: we don’t compromise on materials. EvGuru strictly uses SIRIM-certified components. Now, why is that important?


Well, SIRIM is Malaysia’s leading certification body, ensuring that only top-tier products make the cut. From Type A RCCBs to PVC conduits and MCBs, EvGuru guarantees that everything meets the highest safety standards. The worst thing you can do is to opt for an installer who cuts corners on material quality—cheap conduits or substandard circuit breakers might save you a buck today, but the risks down the road? Totally not worth it.


Also, a quick word on wiring. Whether it's copper or aluminum, the cables need to be robust enough to handle high-voltage charging. EvGuru is talking 6-gauge or 8-gauge wires for Level 2 chargers. Not only does this ensure safe power transmission, but it also guarantees that your charger won’t be overworked and give out prematurely. There’s a reason why these little details matter!

Key Materials and Standards for Safe and Reliable EV Charger Installations

Material

Why It Matters

EvGuru’s Standard

SIRIM Certification

Ensures top-tier safety and quality, preventing risks from substandard materials.

EvGuru uses SIRIM-certified components.

Type A RCCB

Protects against electrical faults, preventing potential hazards like electric shocks or fires.

EvGuru guarantees the use of Type A RCCBs for safety.

PVC Conduit

Safeguards electrical wiring from damage, ensuring safe and long-lasting installations.

SIRIM-certified PVC conduits ensure top protection.

MCBs (Mini Circuit Breakers)

Prevents electrical overload, reducing the risk of short circuits or system failure.

EvGuru uses certified MCBs for robust protection.

Copper/Aluminum Wiring

Handles high-voltage charging, ensuring efficient and safe power transmission.

6-gauge or 8-gauge wires are used for Level 2 chargers.

Heavy-Duty Cables

Ensures the charger can handle long-term use without power loss or premature wear.

High-capacity cables ensure durability and efficiency.



Highlighting the importance of using SIRIM-approved materials for EV charger installations, including RCCBs, PVC conduits, and MCBs for safety
Highlighting the importance of using SIRIM-approved materials for EV charger installations, including RCCBs, PVC conduits, and MCBs for safety


3. Compliance: Is Your Charger Fully Certified?

You wouldn't drive an uncertified car, so why install an uncertified charger? One crucial aspect often overlooked is ensuring that your EV charger installation complies with local and international standards. In Malaysia, this includes certifications from authorities like SIRIM for the installation components and compliance with regulations set by Tenaga Nasional Berhad (TNB). These aren’t just fancy acronyms—they ensure that your charger performs safely and reliably.


Did you know that there are different types of chargers—single-phase and three-phase? Depending on your home setup and car requirements, you might need one or the other. An experienced installer will be able to guide you through this decision and even help with load management, ensuring that your home’s electrical system can handle the additional load without tripping your circuit breaker every time you charge your car.


And, of course, there's the all-important placement. It’s not just about where it looks nice; it's about where it’s safe and efficient. A seasoned installer will know where to position your charger for the best results, taking into account things like cable length, proximity to your power source, and the overall layout of your space.


Ensuring Compliance and Efficiency in EV Charger Installations

Factor

Why It’s Important

EvGuru’s Approach

Local and International Standards

Certifications like SIRIM and TNB regulations ensure your charger is safe, reliable, and compliant.

EvGuru adheres to SIRIM and TNB standards for guaranteed safety.

Single-Phase vs. Three-Phase Chargers

Choosing the right type of charger depends on your home setup and EV needs.

EvGuru helps you select and install the appropriate charger type.

Load Management

Ensures your electrical system can handle the additional load without frequent circuit overloads.

EvGuru assesses and optimizes your home’s electrical capacity.

Charger Placement

Proper positioning affects efficiency, safety, and ease of use.

EvGuru strategically places chargers for maximum efficiency.


Emphasizing the importance of ensuring your EV charger is fully certified and installed reliably with complete compliance for safety
Emphasizing the importance of ensuring your EV charger is fully certified and installed reliably with complete compliance for safety


4. Licensed and Certified Installers: Don’t Settle for Less

One of the most critical factors when choosing an installer is ensuring they are properly licensed. In Malaysia, installers must hold an ST License from Suruhanjaya Tenaga, which qualifies them to handle high-voltage installations like EV chargers. It’s not just about plugging things in—these systems require an intricate understanding of electrical engineering and safety protocols.


Look for someone with a track record of EV charger installations specifically. Why? Well, installing an EV charger isn’t the same as setting up your average household appliance. It requires experience with load balancing, high-voltage systems, and a deep understanding of the electrical requirements for EVs.


5. Price: What’s Included and Why Quality Costs More

Now, let’s talk about the price. While it’s tempting to go for the cheapest option, remember that with EV charger installation, you really do get what you pay for. A rock-bottom quote might seem appealing, but that often means corners are being cut somewhere—whether it’s the quality of materials, the time spent on installation, or even compliance with safety regulations.


A good installer will break down the costs for you, explaining exactly what you’re paying for. This usually includes the charger itself, the materials used (such as high-quality wiring and conduits), labor costs, and any necessary permits. Sure, a premium service may cost a little more, but when it comes to your home’s electrical system and your family’s safety, can you really afford to skimp?


Also, consider the long-term savings. A poorly installed charger could lead to costly repairs down the line—or worse, a complete replacement. Paying a bit more upfront for quality materials and skilled labor could save you thousands in the long run.


6. Service and Experience: Look for Specialization and End-to-End Offers

When it comes to service, don’t settle for anything less than the full package. What do I mean by that? Well, a great installer isn’t just there to set up your EV charger and walk away. Look for companies that offer warranties and post-installation support. If something goes wrong down the line (which, let’s face it, can happen with any piece of equipment), you want to know that your installer will be there to fix it without charging you an arm and a leg.


At EvGuru, they stand by our installations, offering comprehensive warranties and ongoing support to ensure that your charger continues to perform optimally. This kind of peace of mind is worth its weight in gold—especially when you’re dealing with something as important as your car’s charging system.


Choosing EV Charger Installation Service: Get It Done Right the First Time

So, there you have it—choosing the right installer for your EV charger isn’t just about finding someone who can do the job; it’s about finding someone who can do it right. From safety considerations to compliance with local standards, the quality of materials used, and the expertise of the installer, every detail matters. Don’t cut corners on this one—it’s worth investing in an experienced, qualified professional who can ensure your installation is safe, reliable, and built to last.


And if you’re in Malaysia, remember to look for those SIRIM-certified materials, Suruhanjaya Tenaga licenses, and compliance with TNB guidelines. Trust me, your future self (and your EV like BYD ) will thank you!


In addition to providing top-tier EV charging services, EVguru also offers a wide range of EV accessories through our online shop. From adaptors and charging cables to specialized Tesla accessories, we’ve got you covered with everything you need to enhance your electric vehicle experience. Visit our store today to explore our full selection of high-quality products tailored to meet all your EV needs.



EV Charger Installation

92 views0 comments

Comments


bottom of page